Yamaha MusicCast SUB 100 Owner's Manual

Also see for MusicCast SUB 100: Setup guide Owner's manual

Contents

CONNECTIONS14 EnLinking this unit with the Pairing Master deviceBy registering this unit as a Pairing Device of theMusicCastnetwork’s Pairing Master (such as a sound bar orwireless streaming speaker), you can use it as a networksubwoofer to enjoy richer sound.1. Register this unit and the MusicCast Surround/Stereo (Pairing Master) compatible unit inthe same location of the MusicCast CONTROLLER app. → p.13 “Registering this unit onthe MusicCast network”)5. Following the guidance in the app screen, register this unit as a subwoofer (Pairing Device).When you have finished registering this unit as a Pairing Device, operate the appropriate room (Pairing Master) in theapp screen to play back audio.■ Linked operation with the Pairing MasterWhen you register this unit as a network subwoofer, this unit will follow operations of the room (Pairing Master).Power operationThis unit’s power setting (Standby/ON) will follow operations of the room (Pairing Master).Volume and other settingsIn accordance with the settings of the room (Pairing Master), this unit's settings will also change in order to obtain optimallow-frequency sound.Settings that are linked:• Volume• High-cut filter (crossover frequency)NOTE● If audio is interrupted, check the app to see whether “Link control” located in the room (Pairing Master) settings isselected as shown below.– For a wireless connection: other than “Speed Boost”– For a wired connection: “Speed Boost”■ To cancel the link with the Pairing MasterOn your mobile device, operate “MusicCast CONTROLLER” to cancel the registration.Pairing Master(sound bar, etc.)Pairing Device(NS-NSW100)2. On your mobile device,start “MusicCastCONTROLLER” and tap(settings).3. Tap “MusicCastSurround/Stereo.”4. Select the room (PairingMaster) with which youwant to link this unit.