Yamaha MusicCast SUB 100 Owner's Manual

Also see for MusicCast SUB 100: Setup guide Owner's manual

Contents

3 EnCAUTIONThis content indicates “risk of injury.”Power supply/power cord• Do not use an AC outlet where the power plug fits loosely wheninserted. Failure to observe this may cause a fire, electricshocks, or burns.• When removing the electric plug from the unit or an AC outlet,always hold the plug itself and not the cord. Pulling by the cordcan damage it and cause electric shocks or a fire.• Insert the power plug firmly all the way into the AC outlet.Using the unit when it is not plugged in sufficiently can causedust to accumulate on the plug, causing a fire or burns.Installation• Do not place the unit in an unstable position where it mightaccidentally drop or fall over and cause injuries.• Do not block this unit's ventilation holes (cooling slits). Thisunit has ventilation holes on the rear to prevent the internaltemperature from becoming too high. Failure to observe thismay trap heat inside the unit, causing a fire or malfunctions.• When installing this unit:– Do not cover it with any cloth.– Make sure the top surface faces up; do not install on its sidesor upside down.– Do not use the device in a confined, poorly-ventilatedlocation.Failure to observe the above may trap heat inside the unit,causing a fire or malfunctions. Ensure that there is adequatespace around the unit: at least 20 cm (7-7/8 in) on top, 20 cm (7-7/8 in) on the sides, and 20 cm (7-7/8 in) on the rear.• Do not install the unit in places where it may come into contactwith corrosive gases or salt air or places that have excessivesmoke or steam. Doing so may result in malfunction.• Avoid being near the unit during a disaster, such as anearthquake. Since the unit may turn over or fall and causeinjury, quickly move away from the unit and go to a safe place.• Before moving this unit, be sure to turn off the power switchand disconnect all connection cables. Failure to observe thismay damage the cables or cause you or someone else to tripand fall.• When transporting or moving the unit always use two or morepeople. Attempting to lift the unit by yourself may damage yourback, result in other injury, or cause damage to the unit itself.Hearing loss• Do not use the unit/speakers or headphones for a long period oftime at a high or uncomfortable volume level, since this cancause permanent hearing loss. If you experience any hearingloss or ringing in the ears, consult a physician.• Before connecting the unit to other devices, turn off the powerfor all devices. Failing to do so may result in hearing loss,electric shock, or device damage.Maintenance• Remove the power plug from the AC outlet before cleaning theunit. Failure to observe this may cause electric shocks.Handling• Do not insert your hand or fingers into panel slits of this unit.Failure to observe this may cause injury.• Do not insert foreign materials such as metal or paper into panelslits of this unit. Failure to observe this may cause a fire,electric shocks, or malfunctions. If foreign material gets into theunit, immediately shut off the power and pull the power plugfrom the AC outlet and request an inspection from the dealerwhere you purchased the unit or from qualified Yamaha servicepersonnel.• Do not do the following:– stand on or sit on the equipment.– put heavy items on top of the equipment.– place the equipment in a stack.– apply unreasonable force to buttons, switches, input/outputterminals, etc.• Avoid pulling the connected cables to prevent injuries ordamage to the unit by causing it to fall.• Do not operate the unit if the sound is distorting. Prolonged usein this condition could cause overheating and result in fire.NoticeIndicates points that you must observe in order toprevent product failure, damage or malfunction anddata loss.Power supply/power cord• If not using the unit for a long period of time, be sure to pull thepower plug from the outlet. Even if the [(A)] (Standby/On)switch has been turned off (the power light is off), a minutecurrent is still flowing.Installation• Do not use this unit in the vicinity of other electronicequipment, such as a TV, radio, or mobile phone. Failure toobserve this may cause this unit or the TV or radio to producenoise.• Do not use this unit in a location that is exposed to directsunlight that becomes extremely hot, such as near a heater, orextremely cold, or that is subject to excessive dust or vibration.Failure to observe this may cause the unit's panel to becomedeformed, the internal components to malfunction, or foroperation to become unstable.• Install this unit as far away from other electronic equipment aspossible.Digital signals from this unit may interfere with other electronicequipment.• If using a wireless function, avoid installing this unit near metalwalls or desks, microwave ovens, or other wireless networkdevices. Obstructions could shorten the transmission distance.Connections• If connecting external units, be sure to thoroughly read themanual for each unit and connect them in accordance with theinstructions.Failure to properly handle a unit in accordance with theinstructions could cause malfunctions.Handling• Do not place vinyl, plastic, or rubber products on this unit.Failure to observe this may cause discoloration or deformationin the panel of this unit.• If the ambient temperature changes drastically (such as duringunit transportation or under rapid heating or cooling) and thereis a chance condensation may have formed in the unit, leave theunit for several hours without turning on the power until it iscompletely dry before use. Using the unit while there iscondensation can cause malfunctions.