English5SPECIFICATIONTypeNS-300 ........... 2-way 3-speaker bass reflex speaker system(Magnetically-shielded type)NS-200 .......... 2-way 2-speaker bass reflex speaker system(Magnetically-shielded type)Speaker UnitNS-300 .................................... 16 cm (6.5”) cone woofer x 23 cm (1”) dome tweeterNS-200 ......................................... 16 cm (6.5”) cone woofer3 cm (1”) dome tweeterNominal Impedance ....................................................... 6 ohmsFrequency ResponseNS-300 ......................................................... 30 Hz – 35 kHzNS-200 ......................................................... 35 Hz – 35 kHzNominal Input PowerNS-300 ....................................................................... 140 WNS-200 ....................................................................... 100 WMaximum Input PowerNS-300 ....................................................................... 400 WNS-200 ....................................................................... 300 WSensitivityNS-300 ......................................................... 91 dB/2.83 V/mNS-200 ......................................................... 90 dB/2.83 V/mCrossover Frequency ....................................................... 3 kHzDimensions (WxHxD)NS-300 ................................................. 212 x 900 x 317 mm(8.3” x 35.4” x 12.5”)NS-200 ................................................. 212 x 850 x 317 mm(8.3” x 33.5” x 12.5”)WeightNS-300 ..................................................... 19.0 kg (41.9 lbs.)NS-200 ..................................................... 16.8 kg (37.1 lbs.)Accessories ................................................................ Stand x 4Screw (6 mm) x 4Wood screw (4 mm) x 4Washer x 4Pad x 4Spike x 4Nut x 4l Specifications subject to change without notice due toproduct improvements.l Care should be taken not to exceed the input power valuesnoted above.PLACING THE SPEAKERSn Using as 2ch stereo speakersBetter stereo images will be obtained when the speakers areslightly angled in towards the listeners.n Using as main speakers in a multi channelsystemPosition the speakers on both sides of the TV. The positioningof speakers is important, because it controls the whole soundquality of a multi channel system. Set up the speakers on thebasis of your listening position by following the owner’s manualsupplied with your amplifier.REMOVING THE FRONT COVERThe front cover is fastened to the enclosure at six points, andcan be removed if desired. To remove the cover, hold on toboth sides and slowly pull straight away from the speaker. Toreattach, line up the six pegs on the inside surface of the coverwith the six corresponding holes on the speaker and pushgently.NoteWhen the cover is removed, take care not to touch thespeaker units with your hands or to exert excessive forcewith tools.Surround LSurround RSubwooferCenterNS-300/NS-200NS-300/NS-200