Yamaha NS-P116 Owner's Manual

Also see for NS-P110: Owner's manual Owner's manual

Contents

EnglishE-9SUBWOOFER SYSTEM YST SW005INPUT /MONOAUTOSTANDBYOFFLOWHIGHOFFPOWERONVOLUME0 10220V-240V110V-120VVOLTAGESELECTOR546INPUT /MONOAUTOSTANDBYOFFLOWHIGHVOLUME0 10OFFPOWERON2110V-120V VOLTAGESELECTOR220V-240V31USING THE SUBWOOFER (SW-P130) Controls and their functions1 Power indicatorLights up GREEN when the POWER switch (2) ispressed in to the ON position and goes off when set tothe OFF position.* Standby modeIf the POWER switch (2) is pressed in to the ONposition and the AUTO STANDBY switch (4) is setto the HIGH or LOW position, this indicator lights upRED when no signal is received by the subwoofer.2 POWER switchPress this switch to the ON position to turn on thepower of the subwoofer. When the power of thesubwoofer is on, the power indicator (1) on the frontpanel lights up GREEN. Press this switch again to setto the OFF position to turn off the power of thesubwoofer.3 VOLTAGE SELECTOR switch(For China, Korean and General models)If the preset setting of the switch is incorrect, set theswitch to the proper voltage range (220V-240V or110V-120V) of your area.Consult your dealer if you are unsure of the correctsetting.WARNINGBe sure to unplug the subwoofer before setting theVOLTAGE SELECTOR switch correctly.4 AUTO STANDBY (HIGH/LOW/OFF) switchThis switch is originally set to the OFF position. Bysetting this switch to the HIGH or LOW position, thesubwoofer’s automatic power-switching functionoperates as explained on page 10. If you do not needthis function, set to the OFF position.* Make sure to change the setting of this switch onlywhen the POWER switch (2) is in the OFF position.5 INPUT terminalsUsed to input line level signals from the amplifier.6 VOLUME controlAdjusts the volume level. Turn the control clockwise toincrease the volume, and counterclockwise todecrease the volume.Rear panelFront panelPort