Yamaha NS-P116 Owner's Manual

Also see for NS-P110: Owner's manual Owner's manual

Contents

EnglishE-111 Set the VOLUME control to minimum (0).2 Turn on the power of all the othercomponents.3 Press the POWER switch to the ON position.* The power indicator on the front panel lightsup in green.4 Play a source containing low-frequencycomponents and adjust the amplifier’svolume control to the desired listening level.5 Increase the volume gradually to adjust thevolume balance between the subwoofer andthe front speakers.Normally, set the control to the level where youcan obtain a little more bass effect than whenthis unit is not used.● Once the volume balance between the subwoofer andthe front speakers is adjusted, you can adjust thevolume of your whole sound system by using theamplifier’s volume control.However, if you change the front speakers (NX-E130)to others, you must make this adjustment again.● For adjusting the VOLUME control, refer to“Frequency characteristics” below.20 50 100 200 500 Hz405060708090100 dBSW-P130NX-E130 Frequency characteristicsFig. 1 shows the frequency characteristics of the subwoofer. Fig. 2 shows the frequency characteristics when thesubwoofer is combined with NX-E130 and the subwoofer’svolume level is set to the figured position.Fig. 1 Fig. 220 50 100 200 500 Hz405060708090100 dBVOLUME0 I0