Yamaha NS-P220 Owner's Manual

Also see for NS-P220: Owner's manual Service manual

Contents

8Main/center/rear speakersOne side of the provided speaker cord has a white brokenline and the other side has no line.Connect the (+) terminals on both the speaker and theamplifier using the side with a white broken line. Connectthe (–) terminals on both components using the side with noline.Red: positive (+)Black: negative (–)Subwoofer (INPUT1/OUTPUT terminals)Connect the (+) terminals on both the subwoofer and theamplifier using one side of the cord. Connect the (–)terminals on both components using the other side of thecord.Red: positive (+)Black: negative (–)m How to connect speaker cords to the input and output terminalsof the speakersFor connections, keep the speaker cords as short as possible. Do not bundle or roll up the excess part of the cords. If theconnections are faulty, no sound will be heard from the speakers.10 mmHow to Connect:1 Press and hold the terminal’s tab, as shown in thefigure.2 Insert the bare wire end properly into the terminal hole.[Remove approx. 10 mm (3/8”) insulation from thespeaker cord.]3 Release your finger from the tab to allow it to locksecurely on the cord’s wire end.4 Test the firmness of the connection by pulling lightly onthe cord at the terminal.NoteDo not let the bare speaker wires touch each other asthis could damage the speaker or the amplifier, or bothof them.White broken line