Yamaha NS-P220 Owner's Manual

Also see for NS-P220: Owner's manual Service manual

Contents

5Mount the rear speakers on a shelf, rack or directly on thefloor, or hang them on the wall.To mount the rear speakers on a wall byusing the provided mounting brackets(type B)NoteIt is recommended that you connect the speaker cords tothe speaker’s terminals before attaching the bracket to thespeaker.1 Attach the bracket to the bottom of the speaker by usingthe provided screw (type B).2 Turn and/or slide the speaker on the bracket accordingto your preference, and then, tighten the screw.3 Fasten screws into a firm wall or wall support as shownin the figure, and hang the holes of the mountingbracket on the protruding screws.* Make sure that the screws are securely caught by thenarrow parts of the holes.NoteIf desired, you can hang the speaker directly on theprotruding screws on the wall without using the bracket.WARNING● Each speaker weighs 0.7 kg (1 lbs. 9 oz.). Do notmount them on thin plywood or a wall with softsurface material. If mounted, the screws may comeout of the flimsy surface and the speakers may fall.This damages the speakers or causes personalinjury.● Do not install the speakers to a wall with nails,adhesives, or any other unstable hardware. Long-term use and vibrations may cause them to fall.● To avoid accidents resulting from tripping over loosespeaker cords, fix them to the wall.● Select a proper position on the wall to mount thespeaker and the bracket so that no one will injure his/her head or face with the edge of the bracket.m Mounting the rear speakers123Mountingbracket(type B)Screw(type B)Mountingbracket(type B)Wall/ wallsupportTapping screw(Available at thehardware store)Min.20 mm65 mm