Yamaha NS-PA40 Owner's Manual

Also see for NS-B40: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

Contents

1 En• Make sure that all parts are included in the package.• Pay attention not to drop the bases when you take them out of the box.Caution• Assemble the speakers on top of soft material, such as a carpet, on a level surface.• Do not grab the grilles on the front panel of the speakers while you are taking them out of the package box orassembling them. Otherwise, the grilles may be crushed.• Install the speakers using the specified screws supplied in the package.• Keep the screws out of reach of children to prevent them from accidentally swallowing a screw.• Tighten the screws firmly so that the front speaker never gets shaky.• Do not insert your fingers into any gaps between movable surfaces. Otherwise, you may pinch and injure yourfingers.• You cannot use only the speaker top. Be sure to assemble the speaker top, bottom and base.Package contentsSpeaker cable 24.5 m (80 ft.) x1To be cut into 5 lengths for the front,center, and surround speakers.Take care to prevent injury whenpreparing the cables.Subwoofer cable 5 m (16 ft.) x1Subwoofer (NS-SW40) x1Surround speaker (NS-B40) x2Center speaker(NS-C40) x1TopBottomBaseScrew x10 (For the front speakers)Front speaker (NS-F40) x2Non-skid padNon-skid pads (24 pcs.) x1For the center and surround speakers.(Including 12 spare non-skid pads.)When placing the speakers on a flat surface, affix theincluded non-skid pads to the corners of the speakerundersides, as shown. The pads will prevent the speakerfrom moving around.Assembling the front speakersShaft length80 mm (3-1/8") or moreNoteHave a Phillips (+) screwdriver (with a shaft length of 80 mm (3-1/8")or more) ready to use during assembly.