Yamaha NS-SW200 Owner's Manual

Also see for NS-SW200: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

5 EnChoose one of the following connection methods most suitable for your audio system.Choose this method if your amplifier has line output (pin jack) terminal(s).( page 5, 6)Choose this method if your amplifier has no line output (pin jack)terminals. ( page 7, 8)NOTICE• Unplug the subwoofer and other audio/video components before making connections, and donot plug them in until all connections are completed.• Connecting methods and terminal names on your component (such as an amplifier or receiver)may be different from those used in this book. Please refer to the owner’s manual that camewith your component.• All connections must be correct, that is to say L (left) to L; R (right) to R; “+” to “+” and “–” to “–”.Example: Connecting one subwooferUse a commercially-available Mono pin cable (1) or a commercially-available Audio pin cable (2) to make the connections.• Connect the SUBWOOFER (or LOW PASS, etc.) terminal on the rear of the amplifier (or AV receiver) to the /MONO INPUT2 terminal of the subwoofer using a commercially-available Mono pin cable (1).Alternatively,• When connecting the subwoofer to the SPLIT SUBWOOFER terminals (featuring L and R channels) on the rear panel of the amplifier, use a commercially-available Audio pin cable (2)to connect the /MONO INPUT2 terminal to the “L” side, and the INPUT2 terminal to the “R” side of the SPLIT SUBWOOFER terminals.NOTEAudio signals input from the /MONO and INPUT 2 terminals on the subwoofer will not be output from the OUTPUT (TO SPEAKERS) terminals.CONNECTIONS12Connecting to line output (pin jack) terminal(s) of the amplifier1121 Mono pin cable2 Audio pin cableSubwooferAmplifier orreceiverNS-SW300121 Mono pin cable2 Audio pin cableSubwooferAmplifier orreceiverNS-SW200