Yamaha NS-SW700 Owner's Manual

Also see for NS-SW700: Owner's manual Owner's manual

Contents

English11 EnThis function automatically switches the unit between standby and power-on mode.The subwoofer automatically places itself in standby mode if it does not receive an input signal for 7 or 8 minutes. (Thepower indicator lights red.)When the subwoofer detects a bass signal input of below 200 Hz, it automatically places itself in power-on mode. (Thepower indicator lights green.)Notes• This function is available only when the POWER switch and STANDBY/ON button are set to ON.• Noise received from other appliances may extend the time period before the subwoofer places itself in standbymode to more than 8 minutes.1 Set the subwoofer to standby.2 Change the AUTO STANDBY setting.- LOW: Select this position to activate this function.- HIGH: If this function does not operate with AUTO STANDBY switch set to LOW, select this position so that thesubwoofer detects input signals with a lower level and switches the power on automatically.- OFF: Select this position to deactivate this function, for example, when the subwoofer switches the power onunexpectedly by sensing noises from other appliances.AUTOMATIC POWER-SWITCHING FUNCTIONChanging the AUTO STANDBY setting