Periodic maintenance and adjustment7-974. Install the transmission oil drainbolt and its new gasket, and thentighten the bolt to the specifiedtorque.5. Refill with the specified amount ofthe recommended transmissionoil.NOTICEECA10453 In order to prevent clutch slip-page (since the transmission oilalso lubricates the clutch), donot mix any chemical additives.Do not use oils with a dieselspecification of “CD” or oils of ahigher quality than specified. Inaddition, do not use oils labeled“ENERGY CONSERVING II” orhigher. Make sure that no foreign mate-rial enters the transmission.6. Check the O-ring for damage, andreplace it if necessary.7. Install and tighten the transmis-sion oil filler cap.8. Start the engine, and then let it idlefor several minutes while checkingthe transmission for oil leakage. Ifoil is leaking, immediately turn theengine off and check for the cau-se.Tightening torque:Transmission oil drain bolt:14 N·m (1.4 kgf·m, 10 lb·ft)Recommended transmission oil:See page 9-1.Oil change quantity:0.30 L (0.32 US qt, 0.26 Imp.qt)1. O-ring1