Yamaha R-S202BL Owner's Manual

Also see for r-s202: Owner's manual Owner's manual Owner's manual Owner's manual Service manual

16 EnFM/AM TUNING1 Press TUNER to select the tuner as the inputsource.2 Press BAND to select the FM band.3 Press MENU to enter the Option menu.The Option menu for TUNER is displayed (seepage 19).4 Press  /  to select “AUTO PRESET”, andthen press ENTER.This unit starts scanning the FM band about3 seconds later from the lowest frequency upwards.y• Before scanning begins, you can specify the first presetnumber to be used by pressing PRESET j / i or  / .• To cancel scanning, press .When a station to preset is found, information isdisplayed on the front panel display as shown in theillustration above.When scanning is complete, “FINISH” is displayed,and then the display returns to the Option menu.To return the display to the original state, pressMENU.■ Presetting stations manuallyYou can manually register the desired radio stations.1 Tune in to the desired FM/AM station.See page 15 for tuning instructions.2 Press MEMORY.“MANUAL PRESET” is displayed briefly on thefront panel display, and then the preset number towhich the station will be registered is displayed.yBy holding down MEMORY for more than 2 seconds, youcan skip the following steps and automatically register theselected station to an empty preset number (i.e., the presetnumber following the last preset number used).3 Press PRESET j / i to select the presetnumber to which the station will beregistered.When you select a preset number to which no stationis registered, “EMPTY” is displayed. When youselect a preset number to which a station has alreadybeen registered, the frequency of the station isdisplayed.4 Press MEMORY.When registration is complete, the display returns tothe original state.y• To cancel registration, switch input or band or do not performany operations for about 30 seconds.• You can also preset stations manually by pressing buttons onthe front panel with the same names as remote control.Preset number FrequencySLEEPLINE 1CD TUNERTUNINGPRESETTREBLEMEMORYINFOBANDLINE 2 LINE 3APRESET j / iMEMORYPreset number