Yamaha RX-V365 Owner's Manual

Also see for RX-V365: Service manual Owner's manual Connection guide Owner's manual Owner's manual

28 EnFM/AM tuningUse this feature to store the FM or AM stations manually.1 Tune into a station.See page 27 for using instructions.2 Press HMEMORY.The MEMORY indicator flashes on the front paneldisplay for approximately 30 seconds.3 Press EA/B/C/D/E and FPRESET/TUNINGl / h repeatedly to select a preset stationgroup and number (A1 to E8) while theMEMORY indicator is flashing.Check that the colon (:) appears on the front paneldisplay.• To select a higher preset station group and number,press FPRESET/TUNING h.• To select a lower preset station group and number,press FPRESET/TUNING l.4 Press HMEMORY while the MEMORYindicator is flashing.The station band and frequency appear on the frontpanel display with the preset station group andnumber you have selected.You can tune into any desired station simply by selectingthe preset station group and number under which it isstored.1 Press EA/B/C/D/E (or jA/B/C/D/E)repeatedly to select the desired presetstation group (A to E).The preset station group letter appears on the frontpanel display and changes each time you press thebutton.2 Press FPRESET/TUNING l / h (oriPRESET l / h) to select the desiredpreset station number (1 to 8).The preset station group and number, along withstation band and frequency, appear on the front paneldisplay.You can exchange the assignments of two preset stationsbetween the two. The example below describes theprocedure to exchange preset station “E1” and “A5.”1 Select preset station “E1” using EA/B/C/D/Eand FPRESET/TUNING l / h.See “Selecting preset stations” on this page.2 Press and hold DEDIT PRESET/TUNINGfor more than 3 seconds.“E1” and the MEMORY indicator flash on the frontpanel display.3 Select preset station “A5” using EA/B/C/D/Eand FPRESET/TUNING l / h.“A5” and the MEMORY indicator flash on the frontpanel display.See “Selecting preset stations” on this page.4 Press DEDIT PRESET/TUNING again.“EXCHANGE E1-A5” appears on the front paneldisplay and the assignments of the two preset stationsare exchanged.Manual station presetSelecting preset stationsWhen performing this operation with the remotecontrol, press eTUNER to select “TUNER” as theinput source.TUNED MEMORY:C3 AM 630 kHzFlashesPreset station group and numberTUNED:C3 AM 630 kHzThe displayed station has been stored as C3.Exchanging preset stationsMEMORY:A5 FM 90.50MHzFlashesFlashes