10 EnConnections* You can select the front speaker set from Front speakers (A) and Frontspeakers (B) by pressing CSPEAKERS repeatedly. See page 19 fordetails.■ Connect speaker cables to each speakerCables are colored or shaped differently, perhaps with astripe, groove or ridge. Connect the striped (grooved, etc.)cable to the “+” (red) terminals of your speaker. Connectthe plain cable to the “–” (black) terminals.■ Before connecting to the SPEAKERSterminalA speaker cord is actually a pair of insulated cablesrunning side by side.Remove approximately 10 mm (3/8”) of insulationfrom the end of each speaker cable and thentwist the bare wires of the cable together toprevent short circuits.■ Connecting to the FRONT A terminals1 Loosen the knob.2 Insert the bare end of the speaker wire intothe slit on the terminal.3 Tighten the knob to secure the wire.■ Connecting to the FRONT B, CENTER, andSURROUND terminals1 Press down the tab.2 Insert the bare end of the speaker wire intothe hole on the terminal.3 Release the tab to secure the wire.Speakers Jacks on this unita Front speaker (A) Right* FRONT A (R)b Front speaker (A) Left* FRONT A (L)c Surround speaker Right SURROUND (R)d Surround speaker Left SURROUND (L)e Center speaker CENTERf Front speaker (B) Right* FRONT B (R)g Front speaker (B) Left* FRONT B (L)h Subwoofer SUBWOOFER10 mm (3/8”)123Red: positive (+)Black: negative (–)Red: positive (+)Black: negative (–)
