INSTRUMENT AND CONTROL FUNCTIONS3-73EAU13960SeatTo remove the seatRemove the bolts, and then pull theseat off.To install the seat1. Insert the projections on the frontof the seat into the seat holders asshown.2. Place the seat in the original posi-tion, and then tighten the bolts.NOTE:Make sure that the seat is properly se-cured before riding.EAU37490SidestandThe sidestand is located on the left sideof the frame. Raise the sidestand orlower it with your foot while holding thevehicle upright.WARNINGEWA14190The vehicle must not be ridden withthe sidestand down, or if the side-stand cannot be properly moved up(or does not stay up), otherwise thesidestand could contact the groundand distract the operator, resultingin a possible loss of control.1. Bolt1. Projection2. Seat holder
