PERIODIC MAINTENANCE AND MINOR REPAIR6-2767. While applying the front brake,push down hard on the handlebarseveral times to check for properfork operation.8. Install each front fork leg guard byinstalling the bolts.EAU25080Rear wheelEAU39770To remove the rear wheelWARNINGEWA10820 It is advisable to have a Yamahadealer service the wheel. Securely support the motor-cycle so that there is no dangerof it falling over.1. Loosen the axle nut.2. Remove the brake pedal free playadjusting nut, and then disconnectthe brake rod from the brake cam-shaft lever.3. Loosen the locknut and drive chainadjusting nut on each end of theswingarm.4. Lift the rear wheel off the groundaccording to the procedure onpage 6-25.5. Remove the axle nut and washer,then pull the wheel axle out.1. Axle nut2. Washer3. Drive chain slack adjusting nut4. Locknut14321. Brake pedal free play adjusting nut2. Brake rod3. Brake camshaft lever1 23
