PERIODIC MAINTENANCE AND MINOR REPAIR6-1164. Install the engine oil drain bolt, andthen tighten it to the specifiedtorque.5. Add the specified amount of therecommended engine oil, andthen install and tighten the oil fillercap.ECA00133CAUTION:_ In order to prevent clutch slip-page (since the engine oil alsolubricates the clutch), do notmix any chemical additives. Donot use oils with a diesel speci-fication of “CD” or oils of ahigher quality than specified. Inaddition, do not use oils labeled“ENERGY CONSERVING II” orhigher. Make sure that no foreign mate-rial enters the crankcase._6. Start the engine, and then let it idlefor several minutes while checkingit for oil leakage. If oil is leaking,immediately turn the engine offand check for the cause.NOTE:_After the engine is started, the engineoil level warning light should go off if theoil level is sufficient._1. Engine oil drain boltTightening torque:Engine oil drain bolt:43 Nm (4.3 m·kgf, 31 ft·lbf)Recommended engine oil:See page 8-1.Oil quantity:Periodic oil change:3.0 L (2.64 Imp qt, 3.17 US qt)Total amount (dry engine):3.6 L (3.17 Imp qt, 3.81 US qt)
