Yamaha VXL1B-24 Installation Manual

Contents

8 VXL1B-24/VXL1W-24/VXL1B-16/VXL1W-16/VXL1B-8/VXL1W-8 Installation GuideInstalling the speakersAt this time, when you want to expand the area of coverage downwards,set the switch to WIDE.3 Setting the directionality (VXL1-24, VXL1-16 only)3-1 Set the directionality by using a flat head screwdriver to operatethe Vertical Coverage Selector on the back of the speaker.4 Connecting the cables4-1 Attach the Euroblock plug to the speaker.NOTEAlthough there are two different speaker connectors for top and bottom,they are the same (connected in parallel internally). You can use eitherone.4-2 After loosening the terminal screws of the Euroblock plug witha flat-blade screwdriver, insert the cable into each terminal andtighten the screws.Tug on the cables to make sure that they cannot be pulled out.NOTEWhen installing outdoors, run the cables through the included terminalcover before inserting them into the connector.NOTEUse a flat head screwdriver with a blade width of 3 mm or less.10°10°10°30°NORMAL WIDE (expands range down 20°)Euroblock plugTerminal coverVertical CoverageSelector