NSTRUMENT AND CONTROL FUNCTIONS3-323456789lti-function display is equippedfollowing:peedometer (which shows theng speed)odometer (which shows the to-distance traveled)tripmeters (which show thetance traveled since they weret set to zero)locksure to turn the key to “ON” be-using the “SELECT” and “RE-T” buttons.en the key is turned to “ON”, allthe display segments of themulti-function display will appearone after the other and then disap-pear, in order to test the electricalcircuit. To switch the speedometer andodometer/tripmeter displays be-tween miles and kilometers, pressthe “SELECT” button for at leasttwo seconds.Odometer, clock and tripmetermodesPushing the “SELECT” button switchesthe display between the odometermode “ODO” and the tripmeter modes“TRIP” in the following order:ODO → TRIP (top) → TRIP (bottom) →ODOTo reset a tripmeter, select it by push-ing the “SELECT” button until “TRIP”begins flashing (“TRIP” will only flashfor five seconds). While “TRIP” is flash-ing, push the “RESET” button for atleast one second.Clock modeTo set the clock:1. Push the “SELECT” button andeter/tripmeter (bottom)eter (top)21
