NSTRUMENT AND CONTROL FUNCTIONS3-1123456789ten the locknut to the specifiedue.ON:ECA10130tighten the locknut againstusting ring, and then tightenthe locknut to the specified torque.WARNINGEWA10220This shock absorber contains highlypressurized nitrogen gas. For prop-er handling, read and understandthe following information beforehandling the shock absorber. Themanufacturer cannot be held re-sponsible for property damage orpersonal injury that may result fromimproper handling. Do not tamper with or attempt toopen the gas cylinder. Do not subject the shock ab-sorber to an open flame or otherhigh heat sources, otherwise itmay explode due to excessivegas pressure. Do not deform or damage thegas cylinder in any way, as thiswill result in poor damping per-formance. Always have a Yamaha dealerservice the shock absorber.ce Ag preload:imum (soft):istance A = 207 mm (8.15 in)ndard:istance A = 197 mm (7.76 in)ximum (hard):istance A = 187 mm (7.36 in)ening torque:knut:0 Nm (3.0 m·kgf, 21.7 ft·lbf)1
