Yamaha YAS-101 Owner's Manual

Also see for YAS-101: Owner's manual Owner's manual

Contents

3 EnEnglishInstallation: illustrated examplesExample 1: Unit beneath TVExample 2: Unit without stand beneath TV (☞ P. 9)Example 3: Wall mounting• Do not place the unit on/under any other components suchas BD player in a pile. The vibration of the unit may causesystem failure, etc. in other components.• Depending on your installation environment, connectionsto external components such as TV or BD player can bedone before installing the unit. We recommend that youtemporarily place and arrange all components in order todecide which procedure is best done first.• When you clean the unit, use a clean, dry and soft cloth(such as cloth for glasses).• Do not touch the grille on the front and bottom of the unit.• Place the unit away from your TV more than 50 mm (2”)so as not to damage your TV with rear panel of the unit.The brackets on the rear of the unit are removable.You can attach the unit to a wall using the brackets on therear of the unit.1 Attach the supplied mounting templateon a wall and mark the holes of themounting template.2 Remove the mounting template and theninstall the commercially available screwsand the supplied spacers at the marks.3 Hang the unit on the screws using thebrackets on the rear of the unit.• Do not attach the unit to a wall that is made of weakmaterials such as plaster or veneered woods. Doing so maycause the unit to fall.• Use commercially available screws that can support theweight of the installation.• Make sure you use specified screws to attach the unit. Usingclamps other than specified screws, such as short screws,nails, or two-sided tape, may cause the unit to fall.• When connecting the unit, fix the cables in place where theywill not become loose. If your foot or hand accidentally getscaught on a loose cable, the unit may fall.• After attaching the unit, check that the unit is fixedsecurely. Yamaha will bear no responsibility for anyaccidents caused by improper installations.PlacingNotesAttaching the unit to a wallWhen installing the unit on a wall, allinstallation work must be performed by aqualified contractor or dealer. The customermust never attempt to perform this installationwork. Improper or inadequate installationcould cause the unit to fall, resulting inpersonal injury.Example 1 Example 2 Example 3NotesTapes orthumbtacks Mark7 to 9 mm(1/4” to 3/8”)2 to 4 mm(1/16” to 3/16”)Minimum20 mm (3/4”)4 mm (#8)Spacer (5 mm (1/4”))