9-39c. Install the spark plug cap onto the sparkplug, and then place the spark plug on thecylinder head so that the electrodes aregrounded. (This will limit sparking duringthe next step.)d. Turn the engine over several times with thestarter. (This will coat the cylinder wall withoil.)e. Remove the spark plug cap from the sparkplug, and then install the spark plug andthe spark plug cap.6. Lubricate all control cables and the pivotingpoints of all levers and pedals.7. Check and, if necessary, correct the tire airpressure, and then block up the ATV so thatall of its wheels are off the ground. Alternative-ly, turn the wheels a little every month in orderto prevent the tires from becoming degradedin one spot.8. Cover the muffler outlet with a plastic bag toprevent moisture from entering it.9. Remove the battery and fully charge it. Storeit in a cool, dry place and charge it once amonth. Do not store the battery in an exces-sively cold or warm place [less than 0 °C (30°F) or more than 30 °C (90 °F)]. For more in-formation on storing the battery, see page8-50.NOTE:Make any necessary repairs before storing theATV.
