6-56 Due to the synchronizing mechanism in the en-gine, the indicator light may not come on until theATV starts moving.4. Check behind for people or obstacles, andthen release the brake pedal.5. Open the throttle lever gradually and continueto watch to the rear while backing.WARNINGEWB00660EBU20682Engine break-inNOTE: For ATVs equipped with an odometer or an hourmeter, follow the figures given in km (mi) or thefigures given in hours. For ATVs not equipped with an odometer orhour meter, follow the figures given in hours.There is never a more important period in the life ofyour engine than the first 320 km (200 mi) or 20hours of riding. For this reason, you should readthe following material carefully.Since the engine is brand new, do not put an ex-cessive load on it for the first 320 km (200 mi) or 20hours. The various parts in the engine wear andpolish themselves to the correct operating clear-ances. During this period, prolonged full-throttleoperation or any condition that might result in en-gine overheating must be avoided.0–160 km (0–100 mi) or 0–10 hoursAvoid prolonged operation above 1/2 throttle. Varythe speed of the ATV regularly. Do not operate it atone set throttle position.160–320 km (100–200 mi) or 10–20 hoursAvoid prolonged operation above 3/4 throttle. Revthe engine freely, but do not use full throttle at anytime.320 km (200 mi) or 20 hours and beyondThe ATV can now be operated normally.POTENTIAL HAZARDImproperly operating in reverse.WHAT CAN HAPPENYou could hit an obstacle or even a personbehind you, resulting in serious injury.HOW TO AVOID THE HAZARDWhen you shift into reverse, make sure thereare no people or obstacles behind you.When it is safe to proceed, go slowly.
