PERIODIC MAINTENANCE AND ADJUSTMENT6-3763. Remove the burnt-out bulb by pull-ing it out.4. Insert a new bulb into the socket.5. Install the socket (together with thebulb) by pushing it in.6. Install the license plate light unit byinstalling the screws.EAU44940Auxiliary lightThis model is equipped with an LED-type auxiliary light.If the auxiliary light does not come on,have a Yamaha dealer check it.EAU24350Supporting the motorcycleSince this model is not equipped with acenterstand, follow these precautionswhen removing the front and rearwheel or performing other maintenancerequiring the motorcycle to stand up-right. Check that the motorcycle is in astable and level position before startingany maintenance. A strong woodenbox can be placed under the engine foradded stability.To service the front wheel1. Stabilize the rear of the motorcycleby using a motorcycle stand or, ifan additional motorcycle stand isnot available, by placing a jack un-der the frame in front of the rearwheel.2. Raise the front wheel off theground by using a motorcyclestand.To service the rear wheelRaise the rear wheel off the ground byusing a motorcycle stand or, if a motor-cycle stand is not available, by placing1. License plate light bulb2. License plate light bulb socket121. Auxiliary light1
