8 - 23– +ELECSIGNALING SYSTEMNOTE:• Before troubleshooting, remove the following part(-s):1) fuel tank2) bottom cowling3) front cowling4) rear cowling• Troubleshoot with the following special tool(-s).Pocket tester90890-03112CHECKING THE RELAY UNIT• Remove the relay unit from the coupler.• Connect the pocket tester (Ω × 1) to therelay unit terminals as shown.• Check the starting circuit cutoff relay forcontinuity.NOTE:When you switch the tester’s positive andnegative probes, the readings in the abovechart will be reversed.• Are the tester readings correct?Yes → Good.No → Replace.CHECKING THE OIL LEVEL SWITCH• Drain the engine oil.• Remove the oil level switch.• Connect the pocket tester (Ω × 1) to the oillevel switch connector as shown.• Check the oil level switch for continuity asfollows.• Are the oil level switch readings correct?Yes → Good.No → Replace.Tester positive probe →sky blue 1Tester negative probe →blue/red 2Continu-ityTester positive probe →blue/red 2Tester negative probe →sky blue 1No conti-nuityTester positive probe → white 1Tester negative probe → groundOil level switch float posi-tion is upper Å.Continu-ityOil level switch float posi-tion is lower ı.No conti-nuityR/B L/W WGLgL/RL/B Sb B/Y B B/RL/Y12WWÅı11Ofrecido por www.electromanuales.com
