Yamaha YZF690-U Owner's Manual

Also see for R-7: Owner's manual Owner's manual Service manual Owner's manual Owner's manual

Instrument and control functions3-103 “AVE_ _._ MPG”: the average dis-tance that can be traveled on1.0 Imp.gal of fuel.TIP To reset the display, change thedisplay to the average fuel con-sumption display, and hold the“RES” switch until it resets. After resetting, “- -.-” is shown un-til the vehicle has traveled somedistance.EAU93210Coolant temperature displayThis display shows the coolant tem-perature from 40 °C to 116 °C in 1 °Cincrements.If the message “HI” flashes, stop thevehicle, then stop the engine, and let itcool. (See page 6-37.)TIP When the coolant temperature isbelow 40 °C, “Lo” will be dis-played. The coolant temperature varieswith changes in the weather andengine load.EAU93222Air temperature displayThis display shows the air temperaturefrom –9 °C to 50 °C in 1 °C increments.The temperature displayed may varyfrom the actual ambient temperature.TIPWhen the temperature is below –9 °C,“_ _” will be displayed.EAU93241Display brightness and shift timingindicator light settings modeThe following settings can be adjustedin order: Display brightness Shift timing indicator light ON /FLASH / OFF Shift timing indicator light ONr/min Shift timing indicator light OFFr/min Shift timing indicator light bright-nessTo access the settings mode1. Turn the vehicle off.2. Hold the “SEL” switch, turn thevehicle on and continue holdingthe “SEL” switch until the displaychanges to the display brightnesscontrol mode.3. Use the “RES” switch to changethe setting values.1. Coolant temperature display1 1. Air temperature display1