E2-19EMU01180*TOP COWLING LOCK LEVERSTo remove the engine top cowling, pullup the front and rear lock levers. Then liftoff the cowling. When replacing the cowl-ing, check to be sure it fits properly in therubber seal. Then lock the cowling againby moving the levers downward.cCThe air intake grills 1 on the top cowlingare not designed as handles and maybreak if used as such.301052301053*q qEMU00157TILT SUPPORT LEVERTo keep the outboard motor in the tilted-up position, lock the tilt support lever tothe clamp bracket.403033313024qEMU01146FLUSHING DEVICEThis device 1 is used to clean the coolingwater passages of the motor using a gar-den hose and tap water.NOTE:Refer to “Cleaning Cooling-waterPassages” in Chapter 4 for instructions onusage.
