Yazoo/Kees Z9 Commercial Collection System Z9A Operating And Parts Manual
Also see for Z9 Commercial Collection System Z9A: Operator's manualOperator's manualOperator's manualOperator's manualOperator's manual
                         | |
81. Install the Hitch from the Custom Kit accord-ing to the instruction sheet included in thatcarton.2. Slide the Z9 into the hitch.3. Line up holes in the Hitch and Z9 and se-cure with two (2) 3/8” wire lock pins.4. Position the Hitch Brackets so that they arealigned with the holes on the top plate of theHitch and the holes in the forward cross barof the Lower Frame.5. Secure with four (4) 3/8” x 1-1/4” hex bolts,four (4) 3/8” nylon lock nuts, and eight (8) 3/8” flat washers.HitchHitchBracketWire LockPinUpperFrameLowerFrameASSEMBLYMounting the Z9NOTE: This portion of the assembly requireslifting the Z9; two people are required.Tools Required:1. 9/16" wrench2. Ratchet3. 9/16" socket |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine