Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860 IP Phones262Phone/Web User InterfaceFrenchGermanItalianPolishPortugueseSpanishTurkishRussianNoteLoading Language PacksLanguages available for selection depend on language packs currently loaded to the IP phone.You can customize the translation of the existing language on the phone user interface or webuser interface. You can also make new languages (not included in the available language list)available for use on the phone user interface and web user interface by loading language packsto the IP phone. Language packs can only be loaded using configuration files.You can ask the distributor or Yealink FAE for language packs. You can also obtain the languagepacks online: http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage.For more information on obtaining the language packs, refer to Obtaining BootFiles/Configuration Files/Resource Files on page 137.NoteCustomizing a Language for Phone User InterfaceThe following table lists the available languages and associated language packs for the phoneuser interface:Available Language Associated Language PackEnglish 000.GUI.English.langChinese Simplified 001.GUI.Chinese_S.langChinese Traditional 002.GUI.Chinese_T.langFrench 003.GUI.French.langTo modify translation of an existing language, do not rename the language file.The new added language must be supported by the font library on the IP phone. If the charactersin the custom language file are not supported by the phone, the IP phone will display “?” instead.For SIP-T42G/T41P/T40P/T40G/T23P/T23G/T21(P) E2/T19(P) E2 IP phones, they do not supportChinese by default. For more information, contact Yealink FAE.
