Yealink SIP-T22P User Manual

Also see for Yealink SIP-T22P: Auto provisioning guide User guide User guide User guide User guide

Yealink SIP-T22P User Manual Manual pdf 17 page image

User Guide SIP-T22P IP Phone6There are two ways to customize specific configurations on your SIP-T22P IP phone: Using the user interface on the IP phone. Using the user interface in an internet browser window from your PC.The hardware components keypad and LCD screen constitute the phone user interface,which allows the user to execute all call operation tasks and basic configurationchanges directly on the phone. In addition, you can use the web user interface toaccess all configuration settings. In many instances, it is possible to use both the phoneuser interface and the web user interface to operate the phone and change settings.However, in some instances, it is only possible to use the phone or the web userinterface.You can customize your phone by pressing the Menu soft key to access the phone userinterface. The "Advanced Settings" options are administrator level features only, thedefault password is admin (case-sensitive). For more information on customizing yourphone using the available options from the phone user interface, refer to CustomizingYour Phone on page 19.In addition to the phone user interface, you can also customize your phone via web userinterface. In order to access the web user interface, you need to know the IP address ofyour new phone. To obtain the IP address, press the OK key on the phone. Enter the IPaddress (e.g. http://192.168.0.10 or 192.168.0.10) in the address bar of web browser onyour PC. The default user name is admin (case-sensitive) and the password is admin(case-sensitive).The options you can use to customize the IP phone via phone user interface and/or viaweb user interface are listed in the following table:Options Phone User Interface Web User InterfaceStatus--IP--MAC--Firmware--Network--Phone--Accounts√ √