Yealink SIP-T22P User Manual

Also see for Yealink SIP-T22P: Auto provisioning guide User guide User guide User guide User guide

Yealink SIP-T22P User Manual Manual pdf 27 page image

User Guide SIP-T22P IP Phone16You can view the system status of your phone via phone user interface or web userinterface.Available information of phone status includes: Network status including WAN port and LAN port information. Phone status including device model, firmware version and MAC address. Account status indicating the register status of sip accounts.To view the phone status via phone user interface:1. Press , or press Menu->Status.2. Press or to scroll through the list and view the specific information.To view the phone status via web user interface:1. Open the web browser of your computer.2. Enter the IP address in the browser’s address bar, and then click Enter.3. Enter the User Name (admin) and Password (admin) in the pop-up dialogue box.4. Click OK to log in.If your phone cannot contact a DHCP server for any reason, you need to configure astatic IP address manually.To configure a static IP address via phone user interface:1. Press Menu->Settings->Advanced Settings (password: admin) ->Network->WANPort->Static IP Client.2. Enter the parameters IP, subnet mask, default gateway, primary DNS, second DNSin the corresponding fields.3. Press the Save soft key to accept the change or the Back soft key to cancel.If you are using an xDSL modem, you can connect your phone to the Internet via PPPoEmode. You can set a WAN port to be a PPPoE port. The PPPoE port will perform a PPPnegotiation to obtain the IP address. Contact your system administrator for the PPPoEusername and password.