Yealink SIP-T22P User Manual

Also see for Yealink SIP-T22P: Auto provisioning guide User guide User guide User guide User guide

Yealink SIP-T22P User Manual Manual pdf 85 page image

User Guide SIP-T22P IP Phone74To configure call waiting via phone user interface:1. Press Menu->Features->Call Waiting.2. Press or , or the Switch soft key to select Enable from the Call Waitingfield.3. Press or , or the Switch soft key to select Enable from the Play Tone field.4. Press the Save soft key to accept the change or the Back soft key to cancel.5. (Optional.)Enter the call waiting on code or off code respectively in the CW OnCode or CW Off Code field.You can also configure the call waiting feature via web user interface at the pathPhone->Features->General Information>>.You can create a conference with other parties using the phone’s local conferencefeature. You can create a conference between an active call and a call on hold (on thesame or another line) by pressing the Conf soft key. The network conference featureallows you to add and remove specific conference parties.NoteThe SIP-T22P IP phone supports up to 3 parties (including yourself) in a conference call.This is called Local Conference and is the default method of conferencing.To set up a local conference call:1. Place a call to the first party.2. Press the Conf soft key to create a new call.The active call is placed on hold.The network conference feature is not available on all servers. For more information,contact your system administrator.