Advanced Features93Setting a Group Pickup KeyYou can set a line key as a Group Pickup key. Line key is not available on the SIP-T19(P) E2 IP phones, so ask your sys-tem administrator to set a Group Pickup key for your phone.Before You BeginCheck with your system administrator if the group call pickup code is required for this key. If required, get the groupcall pickup code from your system administrator.Procedure1. Navigate to Menu->Features->Dsskey.2. Select the desired line key.3. Select Key Event from the Type field.4. Select Group Pick Up from the Key Type field.5. Select the desired line from the Account ID field.6. (Optional.) Do one of the following:l (Optional.) Enter the string that will appear on the phone screen in the Label field.Enter group call pickup code in the Value field.l For theSIP-T29G IP phones, highlight the Label or Value field. Press Directory (Dir) and then select the desiredcontact from the Directory list(s).7. Press Save.TipBy default, you can long press the desired line key to set it. But your system administrator can configure the phone to enterthe Add Contact screen by long pressing the line key.Picking up a Group Call Using a Group Pickup KeyBefore You BeginYou need to set a Group Pickup key. If you are using the SIP-T19(P) E2 IP phones, check with your system administratorif the Group Pickup key has set for your phone. Any phone within a predefined group of phones receives an incomingcall.Procedure1. Press the Group Pickup key.The call is answered on your phone.Related TopicSetting a Group Pickup KeyCall Park and Call RetrieveYou can use this feature to park a call, and then retrieve the call either from your phone or another phone. After youpark a call, the call is placed on hold, you can continue the conversation after retrieving it.The IP phone supports this feature under the following modes:
