Yealink T2 Series IP Phones User Guide94l FAC mode: park the call to the local extension or a desired extension through dialing the park code.l Transfer mode: park the call to the shared parking lot through a blind transfer. For some servers, the system willreturn a specific retrieve park number (park retrieve code) from which the call can be retrieved after parking suc-cessfully.NoteCall park is not available on all servers. Check with your system administrator to find out if it is available on your phone.TopicsParking or Retrieving a Call in the FAC ModeParking or Retrieving a Call in the Transfer ModeParking or Retrieving a Call with a Park or Retrieve KeyParking or Retrieving a Call in the FAC ModeYour system administrator sets the FAC mode in which you can park and retrieve a call on your phone.TopicsParking a CallRetrieving a Parked Call in the FAC ModeParking a CallBefore You BeginYour system administrator has set call park in the FAC mode.Procedure1. During a call, press Park (You may need to press the More soft key to see the Park soft key).The phone will dial the call park code which is pre-configured.2. Do one of the following:l If you want to park the call against the local extension, press the # key.l If you want to park the call against the desired extension, enter the extension (for example, 4606) where youwant to park the call and press the # key.If the call is parked successfully, you will hear a voice prompt that the call is parked.TipYou can use a Park key or a BLF key to park a call to a specific contact directly. BLF key is not available on the SIP-T19(P) E2IP phone.Related TopicsParking or Retrieving a Call with a Park or Retrieve KeyParking or Retrieving a Call by BLF KeyRetrieving a Parked Call in the FAC ModeBefore You BeginYour system administrator has set call park in the FAC mode. There is a call parked on the extension.Procedure
