Yealink SIP-T38G User Manual
Also see for SIP-T38G: Auto provisioning guideUser guideUser guideAdmin guideAdministrator's guide
                                                                                                                                    | |
Contents
| 
User Guide SIP-T38G IP Phone6Memory key LED (configured as shared line key)LED Status DescriptionSolid green All the parties are idle.Solid red The shared line is seized.Fast flashing green Some party receives the ringback.Fast flashing red The shared line receives an incoming call.Solid orange The shared line is in conversation.Slow flashing orange The shared line conversation is placed on public hold.Slow flashing green The shared line conversation is placed on private hold.Slow flashing red For multi-party call, all the parties place the shared lineconversation on hold.Off The shared line does not exist.There are two ways to customize specific configurations on your SIP-T38G IP phone: Using the user interface on the IP phone. Using the user interface in an internet browser window from your PC.The hardware components keypad and LCD screen constitute the phone user interface,which allows the user to execute all call operation tasks and basic configurationchanges directly on the phone. In addition, you can use the web user interface toaccess all configuration settings. In many instances, it is possible to use both the phoneuser interface and the web user interface to operate the phone and change settings.However, in some instances, it is only possible to use the phone or the web userinterface.You can customize your phone by pressing the Menu soft key to access the phone userinterface. The "Advanced Settings" options are administrator level features only, thedefault password is admin (case-sensitive). For more information on customizing yourphone using the available options from the phone user interface, refer to CustomizingYour Phone on page 19.In addition to the phone user interface, you can also customize your phone via web userinterface. In order to access the web user interface, you need to know the IP address ofyour new phone. To obtain the IP address, press the OK key on the phone. Enter the IPaddress (e.g. http://192.168.0.10 or 192.168.0.10) in the address bar of web browser onyour PC. The default user name is admin (case-sensitive) and the password is admin |
Related manuals for Yealink SIP-T38G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine