Yealink SIP-T38G User Manual

Also see for SIP-T38G: Auto provisioning guide User guide User guide Admin guide Administrator's guide

Contents

Yealink SIP-T38G User Manual Manual pdf 92 page image

User Guide SIP-T38G IP Phone82To set up a network conference call:1. Place a call to the first party.2. Press or the Conf soft key to create a new call.The active call is placed on hold.3. Enter the number of the second party and press , , or the Send soft key.4. When the second party answers the call, press or the Conf soft key to add thesecond party to the conference.5. Press the Conf soft key to create a new call.The conference is placed on hold.6. Enter the number of the new party and then press , , or the Send soft key.7. When the new party answers the call, press or the Conf soft key to add thenew party to the conference.8. Repeat steps 5 to 7 until you have added all intended parties.The procedures to set up a network conference call for specific servers may be differentfrom introduced above. Contact your system administrator for more information.You can use call park feature to place a call on hold, and then retrieve the call fromanother phone in the system (for example, a phone in another office or conferenceroom). You can park an active call by pressing the call park key on the phone. If the callis parked successfully, the response is either a voice prompt confirming that the call wasparked, or a visible indication on the LCD screen.NoteTo configure a call park key via phone user interface:1. Press Menu->Features->DSS Keys->Memory Keys (or Line Keys).2. Select the desired DSS key.3. Press or , or the Switch soft key to select Key Event from the Type field.4. Press or , or the Switch soft key to select Call Park from the Key Type field.5. Press or , or the Switch soft key to select the desired line from the AccountID field.Call Park feature is not available on all servers. Contact your system administrator formore information.