Yealink SIP-T38G User Manual
Also see for SIP-T38G: Auto provisioning guideUser guideUser guideAdmin guideAdministrator's guide
                                                                                                                                    | |
Contents
| 
Basic Call Features792. Enter the number you want to transfer the call to.3. Press or the Transfer soft key to complete the transfer.Then the call is connected to the number to which you are transferring.To perform a semi-attended transfer:1. Press or the Transfer soft key during a call.2. Enter the number you want to transfer the call to.3. Press or to dial out.4. Press or the Transfer soft key to complete the transfer when receivingringback.To perform an attended transfer:1. Press or the Transfer soft key during a call.2. Enter the number you want to transfer the call to.3. Press or to dial out.4. After the party answers the call, press or the Transfer soft key to complete thetransfer.If you are using a handset, the transfer can be completed by hanging up the handset.You can cancel the transfer before the call is connected by pressing the Cancel soft key.You can enable or disable the call waiting feature on the phone. If the call waitingfeature is enabled, you can receive another call when there is an active call on thephone. If the call waiting feature is disabled, another incoming call is automaticallyrejected by the phone with a busy message when there is an active call on the phone.You can also enable the play tone feature to hear a warning tone when receivinganother call.To configure call waiting via phone user interface:1. Press Menu->Features->Call Waiting.2. Press or , or the Switch soft key to select Enable from the Call Waiting |
Related manuals for Yealink SIP-T38G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine