Yealink SIP-T42G User Manual

Also see for Yealink SIP-T42G: Developer's guide Administrator's guide Manual Auto provisioning guide Getting started

Contents

Yealink SIP-T42G User Manual Manual pdf 139 page image

Advanced Phone Features125To pick up an incoming call when the IP phone is idle:1. Press the BLF key.The incoming call of the monitored user is answered on the IP phone.NoteBLF ListYou can use the BLF List feature to monitor a list of users defined by your system administrator.For example, your system administrator enables BLF List, and creates a BLF List URI (e.g.,BLFList@example.com) including a list of user1, user2 on the server. The BLF List keys on the IPphone can present the status of user1 and user2. The key LEDs illuminate either flashing or soliddepending on the status of those users. For more BLF List key LED indicators, refer to LEDInstructions on page 5.You can use the BLF List keys in the following ways: When the monitored user is idle, press the BLF list key to dial out the phone number. When there is already an active call on the IP phone, you can transfer the active call to themonitored user by pressing the BLF List key. The phone handles the active call differentlydepending on the transfer mode on DSS key. For more information on the transfer modeon DSS key, refer to Configuring Transfer Mode on DSS Key on page 123. When the monitored user receives an incoming call, press the BLF list key to pick up thecall directly. Before picking up an incoming call, ensure that the BLF List Pickup Code hasbeen configured in advance. If the code is not configured, the phone will place a call to themonitored user instead of picking up the incoming call of the monitored user when youpress the BLF List key. When there is a conversation on the monitored user, press the BLF list key to barge in andset up a conference call. Before barging in an active call, ensure that the BLF List Barge InCode has been configured in advance. If the code is not configured, the phone will place acall to the monitored user instead of barging in an active call of the monitored user whenyou press the BLF List key. When a call is being parked against the monitored phone, press the BLF List key to retrievethe parked call from the monitored user. Before retrieving the parked call, ensure that theBLF List Retrieve Call Parked Code has been configured in advance. If the code is notconfigured, the phone will place a call to the monitored user instead of retrieving theparked call when you press the BLF List key.To configure BLF List settings via web user interface:1. Click on Account->Advanced.2. Select the desired account from the pull-down list of Account.If the call pickup code is not configured, the phone will place a call to the monitored userinstead of picking up an incoming call of the monitored user when you press the BLF key.