Yealink SIP-T42G User Manual
Also see for Yealink SIP-T42G: Developer's guideAdministrator's guideManualAuto provisioning guideGetting started
                                                                                                                                                                                            | |
Contents
| 
User Guide for the SIP-T42G IP Phone40The LCD screen prompts the following warning:4. Press the OK soft key to confirm the deletion or the Cancel soft key to cancel.You can also delete all groups by pressing the Option soft key, and then select Delete All.Adding ContactsYou can add contacts to the local directory in one of the following ways: Manually From call history From a remote phone bookAdding Contacts ManuallyTo add a contact to the local directory manually:1. Press the Directory soft key.The IP phone enters the local directory directly as there is only Local Directory enabled inthe directory by default.If Local Directory is removed from the directory (refer to Directory on page 36), pressMenu->Directory->Local Directory to enter the local directory.2. Select the desired contact group and then press the Enter soft key.If the contact you want to add doesn’t belong to any group, select All Contacts and thenpress the Enter soft key.3. Press the Add soft key.4. Enter the name and the office, mobile or other numbers in the corresponding fields.5. Press or , or the Switch soft key to select the desired account from the Accountfield.If Auto is selected, the phone will use the default account when placing calls to the contact |
Related manuals for Yealink Yealink SIP-T42G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine