Configuring Basic Features227The LCD screen prompts “Copy to all lines?”.3) Press the OK soft key to accept the change.c) If you select No Answer Forward, you can configure it for a specific account.1) Press or , or the Switch soft key to select the desired value from theNo Answer Forward field.2) Enter the destination number you want to forward all unanswered incomingcalls to in the Forward to field.3) Press or , or the Switch soft key to select the ring time to wait beforeforwarding from the After Ring Time fieldThe default ring time is 12 seconds.4) (Optional.) Enter the no answer forward on code and off code respectively inthe On Code and Off Code fields.You can also configure the no answer forward for all accounts. After the no answerforward was configured for a specific account, do the following:1) Press or to highlight the No Answer Forward field.2) Press the All Lines soft key.The LCD screen prompts “Copy to all lines?”.3) Press the OK soft key to accept the change.5. Press the Save soft key to accept the change.To configure forward international via phone user interface:1. Press Menu->Settings->Advanced Settings (default password: admin) ->FWDInternational.2. Press or , or the Switch soft key to select the desired type from the FWDInternational field.3. Press the Save soft key to accept the change.Call transfer enables IP phones to transfer an existing call to another party. IP phonessupport call transfer using the REFER method specified in RFC 3515 and offer three typesof transfer: Blind Transfer -- Transfer a call directly to another party without consulting. Blindtransfer is implemented by a simple REFER method without Replaces in the Refer-Toheader. Semi-attended Transfer -- Transfer a call after hearing the ringback tone.Semi-attended transfer is implemented by a REFER method with Replaces in theRefer-To header. Attended Transfer -- Transfer a call with prior consulting. Attended transfer isimplemented by a REFER method with Replaces in the Refer-To header.
