Yealink SIP-T48G User Manual
Also see for Yealink SIP-T48G: Developer's guideAdministrator's guideManualAuto provisioning guideGetting started
                                                                                                                                                                                                                                                                              | |
Contents
| 
Basic Call Features163Call TransferYou can transfer a call to another party during a call in one of three ways: Blind Transfer: Transfer a call directly to another party without consulting. Semi-Attended Transfer: Transfer a call when the target phone is ringing. Attended Transfer (Consultative Transfer): Transfer a call with prior consulting.Blind TransferBefore performing a blind transfer (except you use dial number method), make sure that thetransfer mode on DSS key is configured as Blind Transfer. For more information on how toconfigure it, refer to Configuring Transfer Mode on DSS Key on page 188.To perform a blind transfer during a call:1. Press or tap the Transfer soft key during a call.2. You can do one of the following:- Enter the number you want to transfer the call to.Press or tap Transfer to complete the transfer.If you are using a handset, the transfer can be completed by hanging up the handset.- Tap the Directory soft key, and then tap All Contacts. Search for the contact and tapthe desired contact to complete the transfer.- Tap the Directory soft key, and then tap Remote Phone Book. Search for the contactand tap the desired contact to complete the transfer. (Remote phone book should beconfigured in advance. Refer to Remote Phone Book on page 90 for moreinformation.).- Tap the History soft key, and then tap the desired list. Search for the contact and tapthe desired contact to complete the transfer. |
Related manuals for Yealink Yealink SIP-T48G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine