Yealink SIP-T48G User Manual

Also see for Yealink SIP-T48G: Developer's guide Administrator's guide Manual Auto provisioning guide Getting started

Contents

Yealink SIP-T48G User Manual Manual pdf 204 page image

User Guide for the SIP-T48G IP Phone190DPickup soft key. Before picking up an incoming call, ensure that the directed call pickup codehas been configured in advance.To pick up an incoming call using the BLF key or the DPickup soft key:1. Tap the BLF key or the DPickup soft key.The incoming call of the monitored user is answered on the IP phone.NoteParking a Call/Retrieving a Parked Call to the Monitored UserYou can press the desired BLF key to park a call or retrieve a parked call directly in FAC mode. Itshould be pre-configured by your system administrator.To park a call in FAC mode:1. During a call, tap the Park soft key (You may need to tap the More soft key to see the Parksoft key).2. Tap to back to the idle screen, and then tap the desired BLF key to park the call to themonitored user.To retrieve a parked call in FAC mode:1. Tap the Retrieve soft key on the dialing screen.2. Tap to back to the idle screen, and then tap the desired BLF key to retrieve a call thatis parked to the monitored user.NoteBLF ListYou can use the BLF List feature to monitor a list of users defined by your system administrator.For example, your system administrator enables BLF List, and creates a BLF List URI (e.g.,BLFList@example.com) including a list of user1, user2 on the server. The BLF List keys on the IPphone can present the status of user1 and user2. The key icons illuminate flashing or soliddepending on the status of those users. For more BLF List key icon indicators, refer to LEDInstructions on page 9.You can use the BLF List keys in the following ways: When the monitored user is idle, tap the BLF list key to dial out the phone number. When there is already an active call on the IP phone, you can transfer the active call to theIf the directed call pickup code is not configured, the phone will place a call to the monitoreduser instead of picking up an incoming call of the monitored user when you tap the BLF key orthe DPickup soft key.Make sure that the call park code/park retrieve code is configured via web user interface at thepath: Feature->Call Pickup. For more information, refer to FAC Mode on page 171.