User Guide for the SIP-T48S IP Phone162Call TransferYou can transfer a call to another party during a call in one of three ways: Blind Transfer: Transfer a call directly to another party without consulting. Semi-Attended Transfer: Transfer a call when the target phone is ringing. Attended Transfer (Consultative Transfer): Transfer a call with prior consulting.Blind TransferBefore performing a blind transfer (except you use dial number method), make sure that thetransfer mode on DSS key is configured as Blind Transfer. For more information on how toconfigure it, refer to Configuring Transfer Mode on DSS Key on page 185.To perform a blind transfer during a call:1. Press or tap the Transfer soft key during a call.2. You can do one of the following:- Enter the number you want to transfer the call to.Press or tap Transfer to complete the transfer.If you are using a handset, the transfer can be completed by hanging up the handset.- Tap the Directory soft key, and then tap All Contacts. Search for the contact and tapthe desired contact to complete the transfer.- Tap the Directory soft key, and then tap Remote Phone Book. Search for the contactand tap the desired contact to complete the transfer. (Directory and remote phonebook should be configured in advance. Refer to Directory on page 68 and RemotePhone Book on page 89 for more information.).- Tap the History soft key, and then tap the desired list. Search for the contact and tapthe desired contact to complete the transfer.
