Basic Call Features163To perform a blind transfer to exist call:1. Press or tap the Transfer soft key during a call.2. Tap the desired hold call you want to transfer the call to on the left side.The call is then connected to the call to which you are transferring.Semi-attended TransferBefore performing a semi-attended transfer (except you use dial number method), make surethat the transfer mode on DSS key is configured as New Call or Attended Transfer. For moreinformation on how to configure it, refer to Configuring Transfer Mode on DSS Key on page185.To perform a semi-attended transfer:1. Press or tap the Transfer soft key during a call.2. Do one of the following:- Enter the number you want to transfer the call to.Press or to dial out.- Tap the Directory soft key, and then tap All Contacts. Search for the contact and tapthe desired contact to dial out.- Tap the Directory soft key, and then tap Remote Phone Book. Search for the contactand tap the desired contact to dial out. (Directory and remote phone book should beconfigured in advance. Refer to Directory on page 68 and Remote Phone Book onpage 89 for more information.)- Tap the History soft key, and then tap the desired list. Tap the desired entry to dialout.3. Press or tap Transfer to complete the transfer when receiving ringback.If you are using a handset, the transfer can be completed by hanging up the handset.
