Getting Started314. Use the WLAN settings obtained from your gateway/router to configure this WLAN Profileon the IP phone. Do the following:a) If you select None or WEP from the pull-down list of Security Mode:Enter the profile name, SSID and WPA shared key in the corresponding fields.b) If you select WPA-PSK or WPA2-PSK from the pull-down list of Security Mode:Select the desired Cipher type (TKIP, AES or TKIP AES) from the pull-down list ofCipher Type.Enter the profile name, SSID and WPA shared key in the corresponding fields.5. Tap the Save soft key to accept the change or to cancel.The connected wireless networks will be saved to the storage network list. The storage networklist can store up to 5 wireless networks, you can specify the priority to connect to thecorresponding wireless network.Viewing the Wireless Network InformationTo view the connected wireless network information via phone user interface:1. Tap ->Basic->Wi-Fi.2. Tap after the desired wireless network to view the detailed wireless networkinformation (e.g., Profile Name, SSID or Signal Strength).
