User Guide for the SIP-T54S Media IP Phone170picking up an incoming call, ensure that the directed call pickup code has been configured inadvance.To pick up an incoming call when the IP phone is idle:1. Press the BLF key.The incoming call of the monitored user is answered on the IP phone.If you enable visual alert feature on the phone, you can pick up the incoming call using theDPickup soft key.To pick up an incoming call using the DPickup soft key:1. Press the DPickup soft key.The incoming call of the monitored user is answered on the IP phone.NoteParking a Call/Retrieving a Parked Call to the Monitored UserYou can press the desired BLF key to park a call or retrieve a parked call directly in FAC mode. Itshould be pre-configured by your system administrator.To park a call in FAC mode:1. During a call, press the Park soft key (You may need to press the More soft key to see thePark soft key).2. Press the desired BLF key to park the call to the monitored user.To retrieve a parked call in FAC mode:1. Press the Retrieve soft key on the dialing screen.2. Press the desired BLF key to retrieve a call that is parked to the monitored user.NoteBLF ListYou can use the BLF List feature to monitor a list of users defined by your system administrator.For example, your system administrator enables BLF List, and creates a BLF List URI (e.g.,BLFList@example.com) including a list of user1, user2 on the server. The BLF List keys on the IPphone can present the status of user1 and user2. The key LEDs illuminate either flashing or soliddepending on the status of those users. For more BLF List key LED indicators, refer to LEDInstructions on page 10.If the call pickup code is not configured, the phone will place a call to the monitored user insteadof picking up an incoming call of the monitored user when you press the BLF key or the DPickupsoft key.Make sure that the call park code/park retrieve code is configured via web user interface at thepath: Feature->Call Pickup. For more information, refer to FAC Mode on page 152.
