Yealink T28P User Manual

Also see for SIP- T28P: User guide User guide User guide Configuration guides Quick guide

Contents

Yealink T28P User Manual Manual pdf 95 page image

User Guide SIP-T28P IP Phone84The system establishes call between phone C and B.NoteYou can use call pickup feature to answer someone else’s incoming call on the phone.The SIP-T28P IP phone supports the direct call pickup and group call pickup features.Direct call pickup is used for picking up a call that is ringing at a specific phone number.Group call pickup is used for picking up a call that is ringing at any phone number in thegroup. The pickup group should be predefined, contact your system administrator formore information.You can configure the phone to pick up an incoming call by using the DPickup/GPickupsoft key. You can also configure the call pickup code on a global or per-line basis viaweb user interface.NoteDirect Call PickupTo enable the direct call pickup via web user interface:1. Click on Phone->Features->Call Pickup>>.2. Select Enabled from the pull-down list of Direct Call Pickup.The call park feature code and call park retrieve feature code are predefined on thesystem server. Contact your system administrator for more information.If the parked call is not retrieved within a period of time assigned by the system, thephone performing call park feature will receive call back.If there are many incoming calls at the same time, pressing the Gpickup soft key on thephone will pick up the call that rings first.