Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones442TopicsCall Park and Retrieve ConfigurationExample: Setting Call Park and Retrieve in FAC ModeExample: Setting Call Park and Retrieve in Transfer ModeCall Park and Retrieve ConfigurationThe following table lists the parameters you can use to configure call park and retrieve.Parameter features.call_park.park_mode .cfgDescription It configures the call park mode.PermittedValues1-FAC, park a call through dialing the call park code.2-Transfer, blind transfer the call to a shared parking lot.Default 2Web UI Features->Pick up & Park->Call Park ModeParameter features.call_park.enable .cfgDescription It enables or disables the user to use Park and Retrieve soft keys when performingcall park feature.PermittedValues0-Disabled1-Enabled, the phone will display the Park soft key during a call, and display theRetrieve soft key on the Dialing screen.Default 0Web UI Features->Pick up & Park->Call ParkParameter features.call_park.park_code .cfgDescription It configures the call park code for FAC call park mode, or configures shared parkinglot for Transfer call park mode.PermittedValues String within 32 charactersDefault BlankWeb UI Features->Pick up & Park->Call Park CodeParameter features.call_park.park_retrieve_code .cfgDescription It configures the park retrieve code for FAC call park mode, or configures retrieveparking lot for Transfer call park mode.PermittedValues String within 32 characters
