Yealink VC 400 User Manual

Also see for VC400: Getting started Recovery guide Administrator's guide Administrator's guide Administrator's guide

Contents

Customizing the VC400 Video Conferencing System59- If multiple numbers are stored for the contact, press or to highlight thedesired number, and then press or to dial out the number.To place a call to a conference contact and create a conference:1. Press (Call soft key).2. Press or to select the Directory menu.3. Press or to select the conference contact.You can also select Conference from the pull-down list of All Contacts, and thenpress or to highlight the conference contact4. Press or .The system will call the first member of the conference contact. When the firstmember answers the call, the system will call the secondary member and repeatthis until all conference members have joined to the conference.When the system set up a conference successfully, the display device is shown asbelow:To place a call to a local contact or Cloud contact via the VCP40 phone:1. Press the Directory soft key to enter the Directory list.2. Press or to select the desired directory list (All Contacts, Local or Cloud).3. Press the Enter soft key or to view the contacts in the selected directory.4. Press or to select the desired contact.You can press the or soft key to switch the directory list.5. Do one of the following:- If only one number is stored for the contact, press the Send soft key, orto call the contact.