Yealink VC110 User Manual

Also see for VC110: Getting started Recovery guide Quick start guide Administrator's guide User guide

Contents

Using the VC110 Video Conferencing Endpoint1012. Press or to select the desired input source, and then press .The display device shows the selected source.Video input is configurable via the web user interface at the path Home->Input.You can record local video via the remote control when the endpoint is idle. During acall, the video and presentation which are shown on the display device can berecorded via the remote control and video conferencing phone.Before recording video, you need to insert a USB flash drive to the USB port on theVC110 all-in-one unit to store recorded video. The recorded video will be saved in .mkvformat and named as the recorded time and date. Video can be played on either theendpoint itself or on a computer using an application capable of playing .wav files.NoteBefore recording video, you need to know the following: When recording video, it is not allowed to play or delete the video from the menu. When recording video, it is not allowed to capture screenshots, but you can viewand delete screenshots. When playing video recording, it is not allowed to record again. But when thevideo is paused, you can press to record again. When receiving or making a call, it is not allowed to record. When there is an incoming call during recording, the endpoint will quit recording. When recording during a video call, the record will be finished automatically afterthe call ends. When playing or recording video, it is unavailable to press to return to theidle screen. When playing, recording or pausing video, the endpoint will not go to sleepautomatically. If you remove the working USB flash drive or insert another USB flash drive duringrecording, the recording will be stopped.To configure video recording via web user interface:1. Click on Setting->Video & Audio.The endpoint only supports USB flash drive in FAT32 format.After the USB flash drive is inserted to the USB port on the VC110 all-in-one unit, thedisplay device will prompt "USB device available, press * to record or press # toscreenshot". The icon and used storage will appear on the status bar of the displaydevice. The icon will appear on the LCD screen of the video conferencing phone.You can play the recorded videos in a computer with a player supports .mkv format.